Skip to main content
PoolBoss

The Route

Working answers for your next stop - page 2

The Route brings practical pool care and business guides together for the people running the route.

Overhead view of a pool skimmer crossing clear water beside a stone pool edge

Updated

How to split a pool route when you add a second tech

Split a pool route by area and drive time, not by pool count. Draw the line so each technician gets a tight group of stops with its own service days. Keep the hard pools and your biggest accounts with the experienced tech for the first month. Then tell every customer who's coming before the first new visit.

Read the guide

Updated

Commercial pool water standards: what the code asks of you

A commercial pool must meet the health code its state or county has adopted. The CDC's model code is the common starting point: free chlorine of at least 1 ppm, or 2 ppm with stabilizer, pH of 7.0-7.8, stabilizer at 90 ppm or less, and a logged test before opening each day. Your county has the final word.

Read the guide

Updated

ORP and pool controllers: should you trust one?

ORP measures how hard the sanitizer in the water is working, in millivolts. Most pools aim for 650-750 mV. A controller feeds chlorine to hold that number, but its probe drifts as it ages and gets coated. Trust it only when it agrees with your own test kit, and write down both readings every visit.

Read the guide

Updated

Pool borates: are they worth it on a service route?

Borates are worth it on pools that fight rising pH every week. Held at 30-50 ppm, they buffer pH, cut how much acid a pool needs and mildly suppress algae. On a service route they pay off on plaster and salt pools with heavy pH drift, and they are rarely worth the first dose on pools whose pH already holds.

Read the guide

Updated

Converting a pool to salt water: should you recommend it?

Convert a pool to salt water when the customer accepts the whole bill, not the brochure. A system typically runs $400-1,800 installed, the cell is a wear part replaced every 3-7 years for $300-700, and salt pools push pH up constantly. Over five years it costs about the same as chlorine, and hard fill water tips it against.

Read the guide

Updated

How to raise cyanuric acid in a pool

Raise cyanuric acid by adding about 13 oz of granular stabilizer per 10,000 gallons for every 10 ppm you need, aiming for 30-50 ppm on an outdoor chlorine pool. Put it in a skimmer sock or a bucket of warm water with the pump running, don't backwash for a couple of days, and retest after a week.

Read the guide