Chlorine kills algae; algaecide only prevents it or backs up a treatment, so pick by side effect rather than strength. Polyquat is the safe default - no staining, no foam, highest cost. Copper works but can stain plaster and hair. Quats are cheapest and foam if overdosed. A well-chlorinated pool usually needs none.
Strips are accurate enough for pH and a rough free-chlorine band, and not accurate enough for the readings that drive a dose: free chlorine at shock levels, cyanuric acid, and calcium hardness. Most service businesses run strips for the quick pass and a drop kit or photometer for anything they act on.
Sand blowing back into a pool from a sand filter has three causes: a cracked lateral, a broken standpipe, or a multiport valve leaking past its spider gasket. Before buying any part, confirm the grit is actually filter media and not plaster dust, then note when it appears.
Match the shock to the reading you can afford to move. Cal-hypo adds calcium, dichlor adds cyanuric acid, and liquid chlorine adds neither but loses strength in weeks. On a route, liquid is the sane default for weekly dosing, with cal-hypo held back for algae recovery and pools genuinely low on calcium.
How you clean a pool filter depends on its type: cartridges come out and get rinsed pleat by pleat, DE grids are backwashed and then recharged with fresh powder, and sand is backwashed until the sight glass runs clear. All three are triggered by pressure sitting 8-10 psi over that pool's recorded clean baseline, not by a date.
Qualify before you pursue. Commercial buyers check certification, insurance limits, and documented testing before price is ever discussed, so clear that floor first, then build one reference account, approach property managers rather than owners, and price for daily testing and net-30 payment terms instead of a weekly residential visit.