Skip to main content
PoolBoss

The Route

Working answers for your next stop - page 20

The Route brings practical pool care and business guides together for the people running the route.

Overhead view of a pool skimmer crossing clear water beside a stone pool edge

Updated

Why pool service companies keep chemical records

Pool service companies keep chemical records because a dated log of readings and doses settles customer disputes, protects the company if an incident is ever blamed on the water, satisfies the compliance rules on commercial accounts, and adds value when a route is sold. The record turns your word into evidence.

Read the guide

Updated

Salt pool vs chlorine pool chemical management

Salt pools and chlorine pools need the same core readings and the same targets - the sanitizer is chlorine in both cases. The difference is a salt pool generates its own chlorine from dissolved salt, so you also track salt level and cell condition, and you dose salt and acid instead of adding chlorine each visit.

Read the guide

Updated

Pool chemical dosing guide for service technicians

A chemical dose comes from three numbers: the pool's volume in gallons, how far the reading sits from its target, and the strength of the product you are adding. Multiply the gap by that product's dose rate for the pool size, then add, circulate, and retest before adding more. Start low - you can always add more.

Read the guide

Updated

How to handle a green pool chemically

Clear a green pool by lowering pH toward 7.2, then shocking with chlorine: raise free chlorine to roughly 40% of the cyanuric acid reading and hold it there, brushing and running the filter around the clock. Most blooms clear in 2-5 days. Retest often, re-dose to hold the level, and stop only when the water holds chlorine overnight.

Read the guide

Updated

Pool LSI calculator guide for pool service companies

LSI, the Langelier Saturation Index, is a single number that tells you whether pool water is balanced, corrosive, or scale-forming. You calculate it from pH, water temperature, calcium hardness, and total alkalinity. Aim for -0.3 to +0.3. Below that, water etches surfaces and corrodes equipment; above it, scale builds on tile and the salt cell.

Read the guide

Updated

How to prove to customers what chemicals were added to their pool

Document what you added by logging each chemical, the amount, and the reading that prompted it at the moment you dose the pool, then attach that record to a dated service report you send the customer. The report, with readings and doses tied to a timestamp, is what proves what went in and when.

Read the guide