Skip to main content
PoolBoss

The Route

Working answers for your next stop - page 5

The Route brings practical pool care and business guides together for the people running the route.

Overhead view of a pool skimmer crossing clear water beside a stone pool edge

Updated

Who owns your data in pool service software

You own it - your customer list, your pools, your visit and chemical history, your invoices. But ownership only counts if the software will hand it back as a file. Ask for a self-serve CSV export of every record type before you sign, not on the day you want to leave.

Read the guide

Updated

Vinyl liner repair: patch or replace

Patch it when the liner is under about eight years old and the tear is clean, in a flat area, and no longer than 6-8 inches - a correctly installed underwater patch typically holds 3-5 years. Replace when the liner is past 10 years, brittle at the waterline, out of its track, or already patched twice.

Read the guide

Updated

Pool pump sizing: flow rate, not horsepower

Divide the pool's volume by the turnover hours you want, then by 60, to get the gallons per minute the pump has to move: an 18,000 gallon pool on an 8-hour turnover needs about 38 GPM. Then check that number against the plumbing, because 1.5 inch pipe carries only about 42-45 GPM safely.

Read the guide

Updated

The end-of-season checklist for a pool service route

Decide each account's winter disposition before you touch a pool: full close, reduced frequency, or year-round billing. Then run the close-out visit, log final chemistry and equipment condition, settle open balances while you are still showing up, and put the spring restart date in writing before the route goes quiet.

Read the guide

Updated

Pool closing chemistry: what you leave in the water

You need a pH adjuster, an alkalinity increaser, calcium hardness increaser if the pool is soft, chlorine shock, and a long-life winter algaecide. The order matters more than the products: balance calcium and alkalinity a week before you close, hold pH slightly high, shock, then let chlorine fall back to normal before the cover goes on.

Read the guide